"W" Range Wash Trough For Wall Taps - No Tap Ledge
"W" Range of wall-hung wash troughs for wall taps
Projection from wall = 425mm Height = 350mm (including 150mm high splashback)
Trough Depth = 200mm max.
These wash troughs are built to order in standard lengths - 1200mm, 1500m, 1800mm, 2100mm and 2400mm. Bespoke versions are available from 600mm to 3000mm and other non-standard dimensions can be specified. All are manufactured in the UK as one piece units from grade 304 austenitic stainless steel, 1.2mm thick, with a smooth satin polished non-reflective surface.
Pack Includes:
- Wash Trough
- 38mm (1.5") BSP Unslotted Flush Grated Waste Outlet fitting (choice of location)
- Mounting Brackets Product data sheet Please see the Options tab for further details .
|
Please take care in selecting the options you require. These wash troughs are built to order and we regret that no cancellations can be accepted once manufacturing has commenced. Length: Please choose the standard length of wash trough required. For bespoke lengths, please contact us. Waste Drain Location: The waste drain can be in the centre or on the left or right, from the viewpoint of facing the trough. Front Support Legs: The wash trough is designed to be wall-hung but more than half of buyers choose to add front support legs, to give extra strength. This is particularly worthwhile for wash troughs longer than 1800mm. If there is concern that the wash trough could be sat upon or leaned on heavily, and the front will not be supported by a panel, then legs are recommended. |