|
This adult height, floor standing drinking fountain is constructed from 1.6mm thick stainless steel, so at least 33% thicker than most. It is robust, hygienic and easily installed. The shielded bubbler valve is positioned for ease of use and the smooth radiused design eliminates sharp corners which can cause injury. This model comes with full height shroud which is held in position by security-type screws. The drinking fountain
is manufactured in one piece without joints or crevices from grade 304 stainless steel. All exposed surfaces are polished to a satin finish. For ease of cleaning and hygiene, a splashback is incorporated in the top. Each drinking fountain is supplied with a 32mm flush grated waste fitting and a chrome plated shielded bubbler complete with a self closing push button valve.
The valve incorporates a flow adjuster and strainer and is supplied with a water inlet fitting to suit 15mm diameter pipework.
Width: 305mm
Depth: 350mm (projection from wall)
Height: 990mm (including 75mm high rear upturn but excluding bubbler)
Options:
Dispenser type: standard bubbler valve can be changed to self-closing push button valve fitted with a 255mm high, chrome plated, fixed brass swan-neck spout. Water only flows whilst the button is depressed.
If a swan-neck bottle/cup filler is required, please add 1 working day to the delivery times shown below. |
