Products Map

Genuine replacement for Falcon HPKV SE000 retrofit kits and compatible with some Duravit and Lecico branded waterless urinals.

This product has the part number SE000 engraved into the plastic on the stem and has two locating pins.

UPC 700461826774

Replacement cartridge housing for Armitage Shanks Aridian / Falcon Waterless Urinals that take the Falcon Velocity waterless urinal cartridge. Complete with plastic backnut and washer.

This product facilitates the conversion of the Arica Falcon urinal into a vertical waste outlet, making it compatible with exposed pipework installations.

Housing only with 41mm OD waste, excludes cartridge.

Floor-Shrouded Stainless Steel Security Handwash Basin
Length =  508mm   Width = 420mm   Bowl Depth = 140mm   Height = 860mm (excluding fixing upstand)

This washbasin is designed for use in high risk areas and features all services enclosed within a stainless steel shroud. The unit incorporates a removable access panel for service access and is supplied with a 32mm (11/2” BSP) waste/overflow fitting.(Taps are not included as standard but shown for illustration purposes only.)

Flow Regulator Insert for 15mm

Occasionally, the water flow through a urinal top spreader can be too rapid, causing spillage during flushing. This often occurs when the auto cistern is mounted higher on the wall than ideal, increasing the head height and resulting in a too powerful flush. To avoid the need to lower the cistern, consider using a flow regulator inserted into the top spreader to reduce or eliminate this issue.

Ensure that the water flow direction is into the small black internal "O" ring.

Battery Powered PIR Sensor Flow Control kit for urinal cisterns, everything you need in one box.

Maintains hygiene standards whilst conserving water and dramatically cutting water costs – saving up to 95% of water usage compared with an uncontrolled cistern, and around 30-40% against more basic water management systems.
The Flow Saver consists of an electronic control sensor unit and a solenoid for installation into the water supply pipe of a urinal auto cistern. The unit monitors washroom traffic to schedule cistern flushes. Where no motion is detected a hygiene flush is initiated at 12 hour intervals. During high usage periods where the number of detections exceeds 20, the unit will temporally switch from 30 or 60 minute flushing to 15 minute flushing for improved hygiene.

Features:
•    Anti-Vandal Polycarbonate Domed Housing
•    Test Cycle Function
•    Easy Setup with LED Status Indicator and Beeper
•    Battery Powered
•    Low Battery Warning Light
•    Tamper Proof Cover With Key
•    Wall or Ceiling Mounted
•    High Quality WRAS Approved ASCO Latching Solenoid Valve

Kit Includes:
- Flush controller unit with sensor eye for wall or ceiling mount above the urinals
- Asco solenoid valve for fitting to water supply (15mm compression fit)
- Approx. 1m of  two core cable to connect controller to solenoid
- Cover release key
- Fixing plugs and screws
- 4 x AA  LR6 Alkaline Batteries

Specification:
Construction: ABS/PC
Sensor range: 3 metres
Motion sensor: Passive Infra-Red (PIR) 
Water control: Asco DC latching 2.0mm orifice solenoid valve
Water Pressure: 0.5 - 7.0 BAR
Power: 4 x AA Battery cells (LR6)
Typical Battery Life: Alkaline batteries (supplied) 12-18 months, Lithium batteries (not supplied) 2-3 years
Dimensions: 130 x 130 x 45mm

Click on the Product Data Sheets tab for downloadable instructions and data sheets.

3-second self-closing valve with pedal control. Mount it on the floor or wall. Save water effortlessly with automatic shut-off. Enjoy hygiene and ease of use with the intuitive pedal. Compatible with 15mm diameter pipes. Complete your setup with a basin mounted or wall mounted water spout (not included).

Pressures and Operating Conditions:
Maximum operating pressure: 5 bar
Minimum operating pressure: 0.5 bar
Inlet Connection 1/2 inch
Outlet Connection 1/2 inch