Products Map

The Saracen WhiffAway Waterless hygiene seal valves are one of the replacement components for the Saracen Waterless urinal systems. 
The seal acts as a physical barrier stopping drain odours from entering the washroom.
Hygiene seal valves normally require changing annually.

The Powerball cartridge that sits on the top is available separately.

WR-JZH210W Satin Stainless Twin Toilet Roll Holder

Superior quality and timeless design for prestigious washrooms

• Easy-care 18/10 chrome nickel stainless steel
• Satin finish, welded corners – no sharp edges
• Lockable
• The hidden reserve roll is positioned automatically after
  the first roll is finished
• For rolls with outer diameter up to 125mm

Dimensions:
Height: 264mm
Width:  143mm
Projection:  135mm 
Capacity: 2 x Standard Toilet Rolls 

Finish:  Satin Stainless steel

A 50mm (2"BSP) 'P' trap suitable for our GRP Wash Troughs and some Cleaners Sinks.

This large diameter trap has a fast throughput ideal for commercial installations.

• 75mm water seal
• Multifit compression outlet suits all plastic, copper and lead pipe
• Manufactured in polypropylene
• Conforms to BS EN 274-1:2002

Self closing non-concussive single feed tap is manufactured from brass and has a high polish chrome finish.

Provides approximately 8-10 seconds duration of flow (not adjustable) when the push button top is depressed, savings in both water usage and energy in all commercial and industrial environments.
This tap is supplied with cold and hot indices for either installation.
Inlet Connection - Single Feed (1/2 in) BSP male connection.

WRAS Approved.

Features:
- Self closing operation
- Water & Energy saving
- High polish chrome finish

Pressures & operating conditions:
Minimum operating pressure: 0.5 bar
Maximum operating pressure: 3.0 bar
Maximum Inlet temperature: 43^oC 

Description

Deck-mounted push time-flow mixer tap, with connections for hot and cold water.

The F5SM1001 tap is controlled using a push time-flow button, which runs the tap for an adjustable time of 5-60 seconds.
This mixer is fitted with Franke’s FRAMIC self-closing cartridge, which provides a low maintenance and stagnation-free ceramic cartridge solution.
Steeples adjustment of flow duration. With adjustable, turn-proof temperature stop. For connection to hot water and cold water via hoses with integrated backflow preventer and strainers. 
 

Construction

All-metal construction, high-polished chromium plated brass. Anti-theft aerator, SLIM design, with integrated flow regulator 5.0 l/min
 

Pressure & Operating Conditions
Minimum  flow pressure: 0.50 bar
Minimum flow time 5 seconds
Maximum flow time 60 seconds
35mm drill hole 

High Back 51cm Cleaners Sink in white fireclay and fitted with hinged bucket grating.

Pack includes
• 51cm High back cleaners sink (CL01)
• Hinged bucket grating

Features:
• Acid and alkali resistant
• Antibacterial glazed surfaces
• Stainless steel bucket grating
• Pre-drilled fixing holes
• Handcrafted in the UK
• Dimensions: 510mm length, 380mm projection, 535mm height

Options:
• Legs & Wall Brackets (CL0100010)
• Waste (FT1600013)

For use with wall mounted bib taps (readily available from most good plumbers merchants)

THIS PRODUCT IS USUALLY DELIVERED IN 7-10 WORKING DAYS VIA PALLET SERVICE
Please check pallet service delivery restrictions in the "About Delivery" tab before ordering.

Single concealed urinal cistern & pipework kit for installations where the flushpipes and cistern are to be located behind panels or a stud wall. Kit features high-grade stainless steel pipework with BS EN 1254-2 compression fittings. Compatible with Gentworks range of urinals.

Pack Includes:

- 1x Concealed compact 4.5 litre cistern
- 1x Auto siphon
- 1x Petcock
- 1x Concealed Sparge Pipe Set with pipe clip (for 1 urinal)
- 1x Concealed back spreader

 Single concealed kit Data Sheet

Single exposed urinal cistern & pipework kit for installations where the flushpipes and cistern are to be located on the same side of the wall as the urinal bowls. Kit features high-grade stainless steel pipework with BS EN 1254-2 compression fittings. Compatible with Gentworks range of urinals.

Pack Includes:

- 1x Vitreous china 4.5 litre auto cistern (no brand markings)
- 1x Auto siphon & petcock
- 1x Pair of cistern wall hangers
- 1x Exposed sparge pipe set with pipe clip (for 1 urinal)
- 1x Exposed spreader

 Single exposed kit Data Sheet

Sloping Shroud Stainless Steel Security Handwash Basin
Length =  508mm   Width = 420mm   Bowl Depth = 140mm

This washbasin is designed for use in high risk areas and features all services enclosed within a stainless steel shroud. The unit incorporates a removable access panel for service access and is supplied with a 32mm (11/2” BSP) waste/overflow fitting.(Taps are not included as standard but shown for illustration purposes only.)

Filter and isolation kit designed to protect the performance of solenoid valves. Recommend for use with urinal flush controls with solenoid valve.

The Y strainer has a perforated metal mesh filter that will reduce the risk of waterborne dirt and debris from entering the solenoid valve.

Please note: New pipework will still require purging prior to installation of the the filter.

Apollo Solid Surface Care & Maintenance Kit

Solid Surface products are built to endure years of use, even the occasional misuse. This Solid Surface Care & Maintenance kit can swiftly restore their appearance, revitalising their look.

Includes:
1 x Stone Guard anti-bactericidal surface cleaner
1 x 500ml Lightly abrasive Solid Surface Cream Cleaner
1 x 180 Grit Foam Backed Sand Pad
1 x White Polishing Abrasive Disc
1 x Maroon Abrasive Disc
1 x Grey Abrasive Disc
1 x Pair of Blue Nitrile Gloves
1 x Micro Fibre Cloth
1 x Instruction Leaflet

The Twyford Spectrum urinal plastic waste inserts are no longer available separately, they can only be obtained when purchased with the complete Twyford Spectrum urinal installation pack.
As an alternative we can offer a plastic Aquafree Spectrum cartridge, this product contains a biological block but this will dissolve over time and you will then just have the plastic inset that should stop debris entering the waste like the original product. (see Related Products)

The Mcalpine ST28M compression connector is recommended for linking GW6 urinals to 40mm pipework. It is compatible with the following GW6 urinals:

GW6 Karoo Compact Ceramic Waterless Urinal
GW6 Sahara GRP Waterless Urinal
GW6 Tabernas Waterless Urinal Trough
GW6 Mini Trough Waterless Urinal
GW6 Accona GRP Waterless Urinal Trough

 Product Data Sheet

Unfortunately, production of these stainless steel sinks has ceased. We are currently developing an alternative product.

Stainless Steel Bucket Sink - With Legs and Hinged Grating
Length =  560mm   Width = 465mm   Bowl Depth = 170mm

High quality cleaners' sink made of thick 1.2mm steel which makes them sturdy and resistant to dents and dings. The manufacturing process involves folding and welding the steel sheets and then polishing them to give a great finish. They are of higher quality compared to cheaper pressed stainless cleaners' steel sinks.

This grade 304,1.2mm thick stainless steel bucket sink comes with a hinged bucket grating and a 150mm upstand to protect against spillage. 560mm wide and 465mm deep dimensions, with a  height of 445mm (excluding upstand) for pouring out heavy buckets. Supplied with 2 x legs, a 32mm (1 1/2" BSP) waste/overflow fitting. 

Single Toilet Roll Holder

• Quality stainless steel
• Single toilet roll holder
• Bright stainless steel finish
• Simple yet stylish
• Spring loaded plastic spindle

Dimensions:
Height: 116mm
Width: 127mm
Projection: 115mm

Finish: Stainless steel

Stainless Steel Automatic urinal flushing cistern for commercial applications.

Vandal resistant autoflush operated cistern. Available in 9 or 13.5 litre capacity.
The casing is made from 304 grade stainless steel at 1.2mm thickness.
Can be used on trough urinals