|
Our best seller to schools, including for use in playgrounds, due to its durability.
This wall mounted drinking fountain is constructed from 1.6mm thick stainless steel, so at least 33% thicker than most. It is robust, hygienic and easily installed at adult or junior height. The shielded bubbler valve is positioned for ease of use and the smooth radiused design eliminates sharp corners which can cause injury. This model comes with a half-height undershroud and has a removable baseplate which conceals the supply and waste connections pipework. The plate can be left unfitted if through wall inlet & outlet connections are not possible. It
is manufactured in one piece from grade 304 stainless
steel and is without joints or crevices. All exposed surfaces are polished to a satin finish. For ease of cleaning and hygiene, a splashback is incorporated in the top. Each drinking fountain is supplied with a 32mm flush grated waste fitting and a chrome plated shielded bubbler complete with a self closing push button valve.
The valve incorporates a flow adjuster and strainer and is supplied with a water inlet fitting to suit 15mm diameter pipework.
Width: 305mm
Depth: 350mm (projection from wall)
Height: 320mm (including 75mm high rear upturn and undershroud but excluding bubbler)
Options:
Dispenser type: standard bubbler
valve can be changed to self-closing push button valve fitted with
a 255mm high, chrome plated, fixed brass swan-neck
spout. Water only flows whilst the button is depressed.
For safety reasons, glass/bottle fillers are not designed to withstand
heavy impact and should only be installed in areas with supervision or
low risk of vandalism.
If a swan-neck bottle/cup
filler is required, please add 1 working day to the delivery times shown
below. |
