"B" Range Wash Troughs

"B" Range Wash Troughs

"B" Range Wash Troughs
Ref WMDT1200B-
Our Price (ex VAT)
Price (inc VAT)


Rapid Despatch:
Front Support Legs
Tap Holes
Tap Holes - Special Requirement (if any)
Include taps with appropriate tap holes
Thermostatic Mixing Valve (TMV3)
Delivery Time 8-10 Working Days or 3-4 Working Days if Rapid Dispatch Selected (Scotland adds 3 working days)

  • Description
    We’re experiencing high demand on these products at the moment - current production and delivery time is around 12-14 working days.
    "B" Range of wall-hung wash troughs for deck taps
    Projection from wall = 410mm     Height = 215mm (including 60mm high splashback)
    Trough Depth = 155mm max.
    B Range Wash Troughs are usually delivered in 8-10 Working Days or 3-4 Working Days if Rapid Dispatch Selected (Scotland adds 3 working days).
    •     Available in five lengths
    •     Tap ledge for deck mounted taps
    •     Tap holes drilled as requested
    •     Optional front support legs
    •     Fully welded construction
    •     Integral wall fixing brackets
    •     Anti-splash design
    •     Central 1.5” BSP waste
    Economy model wash trough suitable for high use areas and incorporates an angled front to reduce splashing when in use. 
    A 60mm upstand to the rear allows taps to be mounted on an easy to clean surface. Front legs are available if additional support is required. 
    These wash troughs are finished to order in standard lengths - 1200mm, 1500m, 1800mm, 2100mm and 2400mm. All are manufactured in the UK as one piece units from grade 304 austenitic stainless steel, 1.2mm thick, with a smooth satin polished non-reflective surface.
    Pack Includes:
    - Wash Trough with centre drain and tap holes drilled, as required
    - 38mm (1.5") BSP  Unslotted Flush Grated Waste Outlet fitting
    - Mounting screws

    Data sheetProduct data sheet

    For details of tap and other options please click the "Options" tab.
  • About Delivery
    All "B" Range wash troughs are finished to order and standard length versions are usually delivered in 2 to 3 working days. Custom lengths and designs are generally delivered within 10 working days. The standard delivery charge for UK mainland is £10 per consignment. For locations outside of the UK mainland, including UK islands and Ireland, delivery costs will vary depending upon the size and weight of the consignment. Delivery may also take longer. Please call 0345 202 4535 for a quote and further information.

    Please note that TMV3 valves, taps and dispensers, if selected, are likely to be delivered separately.

    The delivery times stated for this product are representative of what we achieve in 95% of cases for this specific product. If we have reason to believe that one or more of the items in your order will not be delivered within the stated time, we will contact you as soon as possible with a new delivery date, giving the option to cancel the order. Please note that we are unable to specify the time of day your order will be delivered and all goods must be signed for. At time of delivery, please check goods for damage in transit before signing for them in order to avoid disputes over when and where any damage was caused. All goods are checked thoroughly before leaving the warehouse.

  • Options

    Please take care in selecting the options you require. These wash troughs are finshed to order and we regret that no order cancellations can be accepted once manufacturing has commenced.

    Length: Please choose the standard length of wash trough required. For bespoke lengths, please contact us

    Front Support Legs: The wash trough is designed to be wall-hung but more than half of buyers choose to add front support legs, to give extra strength. This is particularly worthwhile for wash troughs longer than 1800mm. If there is concern that the wash trough could be sat upon or leaned on heavily, and the front will not be supported by a panel, then legs are recommended.

    Thermostatic Mixing Valve (TMV3): For premixing hot and cold water to a consistent comfortable temperature, a TMV3 valve is required.  It is also recommended for wash troughs with both cold and hot taps, to help prevent scalding. As an option, a 2-in-1 TMV3 from Dart Valley Systems can be supplied. Click here for details.

    Number of Tap Stations (users):  This allows us to calculate the appropriate locations where tap holes are to be drilled, if they are required.

    Tap Hole Type: There is a choice of tap hole configurations to fit standard tap singles and pairs plus monobloc mixer taps. If "Tap holes to match taps chosen below" is selected, then holes will be drilled to meet the standard configuration for the quantity and type of taps selected in the Include taps option.
    Click here if you would like to read more detail on standard tap hole configurations.

    If you require a tap hole configuration not shown as an option, please select "Special requirement". Then provide a specification in the Tap Holes - Special Requirement text box. Alternatively, please call us on 0345 202 4535 to discuss.

    Include taps with appropriate tap holes: Click here to view more details on the taps offered. There are options to include a popular tap style with your order, configured appropriately for the length of wash trough and number of users. All of the taps are robust and designed for heavy use. Tap holes will be drilled to match the standard configuration for the chosen tap style and quantity, unless a Tap Holes - Special Requirement has been specified.

    Stainless steel soap dispensers: Click here for details on the soap dispenser model offered at a discount with wash troughs.

    Stainless steel paper towel dispensers: Click here for details on the towel dispenser model offered at a discount with wash troughs.

  • Send to Colleague

    Send to Colleague

    : *
    : *
    : *

Related Products

Single User Anti-Contamination Wall Mounted Wash Trough



Price (inc VAT): £276.00

Liquid Soap Dispenser - Deck Mounted



Price (inc VAT): £46.80