Large Floor-Shrouded Security Handwash Basin 508x420mm
Large Floor-Shrouded Stainless Steel Security Handwash Basin
Length = 508mm Width = 420mm Bowl Depth = 140mm Height = 860mm (excluding fixing upstand)
This washbasin is designed for use in high risk areas and features all services enclosed within a stainless steel shroud. The unit incorporates a removable access panel for service access and is supplied with a 32mm (11/2” BSP) waste/overflow fitting.(Taps are not included as standard but shown for illustration purposes only.)
- About Delivery This wash basin is made to order and usually delivered in 8 to 12 working days.The standard delivery charge for UK mainland is £10 per consignment.
Please note that TMV3 valves, taps and dispensers, if selected, are likely to be delivered separately and before the wash basin.
The delivery times stated for this product are representative of what we achieve in 95% of cases for this specific product. If we have reason to believe that one or more of the items in your order will not be delivered within the stated time, we will contact you as soon as possible with a new delivery date, giving the option to cancel the order. Please note that we are unable to specify the time of day your order will be delivered and all goods must be signed for. At time of delivery, please check goods for damage in transit before signing for them in order to avoid disputes over when and where any damage was caused. All goods are checked thoroughly before leaving the warehouse.
Thermostatic Mixing Valve (TMV3): For premixing hot and cold water to a consistent comfortable temperature, a TMV3 valve is required. It is also recommended for basins with both cold and hot taps, to help prevent scalding. As an option, a 2-in-1 TMV3 from Dart Valley Systems can be supplied. Click here for details.
Location of Single Tap: If you intend to use a single tap, please indicate whether the tap will be on the left or right hand side of the basin, from the perspective of a user. We need to know this if you require one tap-hole to be increased in diameter to accommodate a sensor or monobloc mixer tap.
Tap Holes and Taps: This product is built to order therfore tap holes are drilled as required. Standard drilling is 2 x 28mm tap holes, suitable for standard "hot and cold" tap pairs. If you intend to use a single tap but are not purchasing taps with the basin, please choose one of the options described below.
- For standard hot and cold tap pair, select "Pair of 28mm tap holes"
- For a standard or sensor single tap to use with cold only or premixed water supply, select "Single 28mm tap hole"
- For a standard monobloc tap, select "Single 35mm tap hole"
If you are purchasing tap(s) from Gentworks with the basin, tap holes will be drilled appropriate to the tap(s) chosen.
There is a choice of 3 tap types - lever, push-button and monobloc mixer - that can be included with this product, all of which are robust and designed for heavy use. Click here to view more details on the taps offered.
Stainless steel soap dispensers: Click here for details on the soap dispenser model offered at a discount with this product.
Stainless steel paper towel dispensers: Click here for details on the towel dispenser model offered at a discount with this product.
- Send to Colleague
Send to Colleague