Quick Delivery 1500mm "B" Range Economy Wash Trough with 3x 28mm Single Tap holes
An economy model wash trough designed for high-use areas. It has an angled front to reduce splashing and is designed to allow users to wash their hands, face, and forearms effectively. These wash troughs are popular in construction welfare facilities and other similar settings.

If you require a different size or tap hole options and can wait longer, please see our "B" Range Wash Trough in related products below.

Tap Holes:
3x 28mm Single Tap holes for single feed taps with cold only or mixed water supply via a thermostatic mixing valve (not suitable for Hot & Cold Pairs of taps)

• Tap ledge pre-drilled with 3x single 28mm tap holes
• Integral Wall Fixing Brackets
• Anti-splash Design
• Centre Waste Location

All our Wash troughs are manufactured in the UK as one piece units from grade 304 austenitic stainless steel, 1.2mm thick and a non-reflective surface.

Projection from wall = 410mm Height = 215mm (including 60mm high splashback)
Trough Depth = 155mm max.

Please check delivery restrictions in the "About Delivery" tab before ordering.