Range of ceramic individual urinals available in a variety of sizes and styles. Explore our urinal sets for comprehensive packages that include pipework and cisterns.
Coronus 500mm Exposed Trap Urinal Bowl
The Gentworks Coronus is a great value 500mm height wall mounted urinal in vitreous china. Bowl Dimensions: Height = 500mm Width = 383mm Projection from wall = 303mm • Standard spreader flushing urinal Pack includes: Optional Traps: Optional Flush Spreader: Product Data Sheet Coronus 500mm Exposed Trap Urinal |
£86.00
(ex VAT)Mains Water Flushing Urinal - Back Inlet Concealed Trap
The popularity of mains water flushing urinals is on the rise, primarily due to the elimination of exposed or concealed cisterns and their associated sparge pipes. Instead, the flushing mechanism is typically controlled by a direct flush sensor, with the sensor being sold separately. For concealed installations, the direct flush system is available for separate purchase. The installation should include a service duct behind the urinal(s) to accommodate pipe work and electrical connections. Additionally, it is advisable to incorporate access panels as part of the installation to facilitate easy maintenance and adjustments. The Conon urinal boasts a sleek funnel-type design with sharp, clean edges, adding a touch of modern sophistication to your commercial washroom. This urinal is also equipped with a nearly flat chrome flushing spreader, combining both form and function seamlessly. Bowl Dimensions: Height = 655mm Width = 298mm Projection from wall = 276mm Pack includes: |
£175.00
(ex VAT)LAVA Ceramic Waterless Urinal with Falcon Velocity
LAVA F7000 Waterless Urinal with Falcon Waterless Cartridge How it works Urine, which is 96% water, flows down the surface of the urinal and into the unique Falcon cartridge. The cartridge is filled with a special liquid called Allseal, which is not only perfumed, but prevents foul air from rising up from the drain and into the washroom. It does this by floating on the surface inside the cartridge and trapping any particles at the cartridge base. Note that the effectiveness of the Allseal sealant can be impaired by sluicing or by incompatible cleaning chemicals, if proper care is not take, However, there are no mechanical components to go wrong. Regular cleaning consists of spraying on cleaner and wiping it off. Replacing cartridges, a simple job, has to be carried out every three to four months under average use conditions, but can last from 2 to 12 months, dependent on usage. Includes: |