1200mm - Model S
This wash trough, suitable for 2 users, is manufactured in one piece without joints or crevices from grade 304 stainless steel, 1.2mm thick, with all exposed surfaces polished to a satin finish.
(Taps are shown for illustration purposes but are available as an option.)
Customised Versions: These 'S' series wash troughs can be manufactured to any size required, up to 3000mm in length. Other non-standard dimensions can also be specified. Please call 0845 202 4535 for a quote.
Supplied with:
-
38mm (1.5in) BSP
unslotted flush grated waste fitting to either right hand or left hand side
- Mounting brackets
Tap Holes:
Standard drilling will be for 2 pairs of
28mm tap holes with the centre point between the taps at 300mm from each end. If you require a different configuration (e.g. single 28mm holes, 32mm holes for mixer/monoblock taps), please select below. In the event that you indicate "Customer Specified", Gentworks will contact you to obtain your requirements before processing your order.
Front Legs: Stainless steel legs are available for applications where
additional support is required.
Dimensions:
Length: 1200mm.
Width: 500mm (projection from wall).
Trough depth: 190mm falling to 200mm.
1. Choice of tap / control style - push tap pairs, mixer taps and knee taps. If sensor taps are required, please call 0845 202 4535 to obtain a quote specific to your requirements.
2. Stainless steel soap dispensers (discounted from usual £54 each)
3. Stainless steel paper towel dispensers (discounted from usual £59 each) |
