Single User Anti-Contamination Wall Mounted Wash Trough
Single User Anti-Contamination Wall Mounted Wash Trough 500mmWidth: 500mm Projection from wall = 410mm Height = 215mm (including 50mm high splashback)Trough Depth = 165mm max.This wash trough, suitable for 1 user and can be installed 2m apart to maintain social distancing and reduce the risk of infection from Covid-19. Finished-to-order in the UK and manufactured in one piece without joints or crevices from grade 304 austenitic stainless steel, 1.2mm thick, with a smooth satin polished non-reflective surface. It is also available in bespoke lengths and designs. (Taps are shown for illustration purposes but are available as options.)Pack Includes:- 500mm Wash Trough with centre drain and tap holes drilled, if required- 38mm (1.5") BSP Unslotted Flush Grated Waste Outlet fitting
- Mounting screws
- About Delivery 500mm wash troughs are finished to order and standard length versions are usually delivered in 2 to 3 working days if the "Rapid Despatch" option is chose, otherwise in 5 to 7 working days. Custom lengths and designs are generally delivered within 10 working days. The standard delivery charge for UK mainland is £10 per consignment. For locations outside of the UK mainland, including UK islands and Ireland, delivery costs will vary depending upon the size and weight of the consignment. Delivery may also take longer. Please call 0345 202 4535 for a quote and further information.
Please note that TMV3 valves, taps and dispensers, if selected, are likely to be delivered separately.
The delivery times stated for this product are representative of what we achieve in 95% of cases for this specific product. If we have reason to believe that one or more of the items in your order will not be delivered within the stated time, we will contact you as soon as possible with a new delivery date, giving the option to cancel the order. Please note that we are unable to specify the time of day your order will be delivered and all goods must be signed for. At time of delivery, please check goods for damage in transit before signing for them in order to avoid disputes over when and where any damage was caused. All goods are checked thoroughly before leaving the warehouse.
Please take care in selecting the options you require. These wash troughs are finshed to order and we regret that no order cancellations can be accepted once manufacturing has commenced.
Front Support Legs: The wash trough is designed to be wall-hung some buyers choose to add front support legs, to give extra strength f there is concern that the wash trough could be sat upon or leaned on heavily, and the front will not be supported by a panel, then legs are recommended.
Thermostatic Mixing Valve (TMV3): For premixing hot and cold water to a consistent comfortable temperature, a TMV3 valve is required. It is also recommended for wash troughs with both cold and hot taps, to help prevent scalding. As an option, a 2-in-1 TMV3 from Dart Valley Systems can be supplied. Click here for details.
Tap Hole Type: There is a choice of tap hole configurations to fit standard tap singles and pairs plus monobloc mixer taps.
If you require a tap hole configuration not shown as an option, please select "Special requirement". Then provide a specification in the Tap Holes - Special Requirement text box. Alternatively, please call us on 0345 202 4535 to discuss.
Stainless steel soap dispensers: Click here for details on the soap dispenser model offered at a discount with wash troughs.
Stainless steel paper towel dispensers: Click here for details on the towel dispenser model offered at a discount with wash troughs.
- Send to Colleague
Send to Colleague