Products Map

Wall Mounted Washbasin with Single 35mm Tap Hole
Length = 540MM   Projection = 480MM   Height = 160MM 

A stylish and durable stainless steel washbasin with smooth corners and a 65mm deep front apron, featuring integrated wall brackets. It comes with a single 35mm tap hole for a Monobloc mixer tap, and includes an overflow and waste. Tap shown is for illustration only; a similar tap is available as an option.

This innovative bottle filling station offers impressive features for its price point, including a recessed filler and easy push-button operation. An integrated bottle savings counter tracks each 500ml dispensed as one plastic bottle saved, supporting sustainability and promoting regular hydration. Constructed from 1.5mm thick powder-coated stainless steel, the unit is built to last and mounts on a back plate for easy removal and maintenance.

Features:
- Bottle filling drinking fountain
- Plastic bottle savings counter
- Manufactured from 1.5mm thick stainless steel with a matt finish
- Hygienic vandal resistant design
- Non-chilled, no electrical connection necessary
- Wall mounted
- Pipe work cover included
- NSF REG4 certification pending
- Suitable for use with 0.5, 0.75 and 1 litre bottles
- Suitable for indoor and covered outdoor* use
- 1/4" tube mains water connection
- 3/8" tube waste connection
- Gross Weight 9.3kg

Pack Includes:
- Wall mounted bottle filling station
- Pipework cover
- 2x CR123 batteries (for LCD bottle counter)
- 2.5mm Allan key
- Mounting screws & plugs for solid walls
- Waste fitting: JG 3/4" Female BSP x 3/8" Push fit CI321216FS

To maintain a compact design, this unit uses different water and waste connections from our other models. It requires 1/4" LLDPE tubing for the mains supply, which should be installed using a mains water installation kit. A built-in Water Block helps prevent significant flooding by limiting flow volume per cycle. The waste outlet uses 3/8" LLDPE tubing connected via a drain clamp. Optional mains water and waste connection kits are available. Water and drain connections can exit through the wall behind the pipe cover or be surface-mounted and concealed with trunking (trunking not supplied).

*For covered outdoor installations, ensure all pipework is properly lagged to prevent freezing.
Click on the Product Data Sheets tab for downloadable instructions and data sheets.

Increase the stability and durability of your wash troughs with our stainless steel front support legs and bearers. Measuring 817mm in length, these legs provide a total unit height of 950mm and are supplied in pairs. Designed to offer extra support on longer wash troughs or areas where users may be tempted to sit on the wash trough's front edge.

For handed drain model wash trough, one leg can be adjusted to a length of 802mm at the foot to allow for the necessary fall to the waste.

Please note that these stainless steel front support legs are designed specifically for our current range Gentworks wash troughs manufactured after May 2024.

Stainless Steel Trap Shroud for Gentworks WMDTA Wash Troughs

Enhance the appearance and security of your wash trough installation with this stainless steel trap shroud, designed specifically to suit Gentworks WMDTA Wash Troughs.
This accessory conceals the wash trough trap, improving aesthetics and providing added protection against vandalism and unauthorised tampering.

Replacement  Whiffaway Powerballs for use in the Saracen waterless urinal system. 

• Available in packs of 4, 12 and 24 or a tub of 50 (select quantity required)
• Easy to install
• Each Power-Ball is individually sealed.