Products Map

Delabie Temposoft 2 Deck-Mounted Push Tap – A sleek, modern tap with easy soft-touch push-button activation.

Supplied with red and blue markers – Suitable for cold or mixed warm water feed
Soft-touch operation – Easy to use with minimal effort
Automatic shut-off (~7 seconds) – Reduces water waste and running costs
Tamperproof & scale-resistant flow straightener
WRAS Approved – Certification: 2304074

This is a single-feed tap for either cold or pre-mixed warm water. To regulate temperature for warm water supply, we recommend using a TMV3 thermostatic mixing valve. Please note, this is not a mixer tap.

Pressure & Operating Conditions:
Recommended pressure range – 1 to 5 bar
Pre-set flow rate – 3 LPM at 3.0 BAR
Flow time 7 seconds
Tap Hole Size - 22-28mm

Features include:

• Fully approved by WRAS under the TMV3 scheme to the DO8 specification for basin, shower, bidet, and high pressure bath-fill applications
• Rapid thermostatic failsafe on either cold or hot supply failure protects the user from extreme temperature dangers
• Provides extreme mixed water temperature stability under changing supply conditions
• Available in 15mm and 22mm for group mixing

Specifications:
Factory temperature setting: 41-43c
Temperature setting range: 38-46c
Temperature, hot supply: 52-65c
Temperature, cold supply: 5-20c
Minimum hot to mix differential temperature: 10c
Temperature stability: +/- 2c
Working pressure, static: 16 bar max
Working pressure: See charts in detailed images
Flow rate, minimum: See charts in detailed images

When selecting the required TMV, it is essential that it performs at the flow rate required for that application. Although TMV2 allows for ‘group mixing’ to multiple taps, the valve must be sized accordingly to meet the demand. An undersized valve may result in insufficient hot water reaching the tap(s). A 15mm TMV for each tap is recommended but if you wish to use a 22mm TMV for group mixing of two or three taps, please ensure flow rates can be achieved.

This self-closing toggle lever handle deck mounted tap is easy to grip and can be operated by either hand or wrist making the tap ideal for those with limited dexterity and a great choice for primary schools and nurseries.
 
The toggle tap is not thermostatic and must be installed to pre-mixed water with a control device (TMV).

Features:
- Chrome plated 
- WRAS Approval Number: 2106004
- Single feed 1/2" BSP connection
- 22mm/28mm tap holes required
- Approx. 8-12 seconds time flow
- Multi directional lever
- Supplied as single tap
- Easy for young children to operate
- Idea for use in unsupervised areas to stop water wastage

Technical Specification:
Max operating pressure: 5.0 bar static
Min operating pressure: 0.5 bar dynamic
Max inlet temperature: 80°C
Timed flow: 8/12 seconds

This tube cutting tool provides precise, square cuts on LLDPE tubing up to 10mm. Just mark the pipe and use the easy clamp action for a clean, accurate finish.

It is suitable for tube up to 10mm, including the following sizes of standard imperial tubing:

• 1/8"
• 5/32"
• 3/16"
• 1/4"
• 5/16"
• 3/8"