Products Map

Repair Kit for Self-Closing Basin Tap

Non-concussive tap valves can sometimes fail due to factors like excessive water pressure, limescale, high water temperature, or excessive force used to operate them. Once the water is isolated the valve can be changed from the top without the requirement to remove the tap. This repair kit is compatible with Gentworks TAP-C-10 taps and those with production code DTC32 etched at the base of the tap.

The repair kit includes both hot and cold indices.

Replacement 32mm (1-1/4") Centre Pin Waste for Gentworks Drinking Fountains.

These flush grated wastes come supplied most Gentworks stainless steel drinking fountains and are only needed separately if the originals are lost or damaged.

Replacement 32mm (1-1/4") Solid Chrome Waste for use with Gentworks Solid Surface Wash Troughs.

The 1800mm troughs require three, and the 1200mm ones need two. These chrome waste units are provided with the solid surface wash troughs and should only be bought separately if the originals are lost or damaged.

Replacement 38mm (1-1/2") Centre Pin Waste for Gentworks Stainless Wash Troughs & Urinals. 

These flush grated wastes come supplied most Gentworks stainless steel wash and urinals troughs and are only needed separately if the originals are lost or damaged.

The simple solution for repairing dripping or leaking bottle filling valve, suitable for GW-951 and GW-952 drinking fountains.

As fitted to the following models:

GW-951-(Bottle Filler Dispenser)

GW-952-(Bottle Filler Dispenser)

AP-451 (Bottle Filler Dispenser)

AP-452 (Bottle Filler Dispenser)  

Replacement Bottle Filler Nozzle for GW-951 Drinking Fountain.

This nozzle features a stainless steel mesh strainer, which, over time, may accumulate limescale in areas with hard water. If regular cleaning proves ineffective a replacement is available.

As fitted to the following models:

GW-951-(Bottle Filler Dispenser)

GW-952-(Bottle Filler Dispenser)

AP-451 (Bottle Filler Dispenser)

AP-452 (Bottle Filler Dispenser)  

WRAS approved bubbler tap as supplied with Gentworks current range drinking fountains.

This bubbler is suitable for the following Gentworks Drinking fountains:

GW-361, GW-362, GW-951, GW-952

Supplied With:
35mm long shank
Brass back nut with washer
Rubber sealing gasket 
3/8" BSP to 1/2" BSP connector with a 15mm compression fitting
Optional fit anti-rotation pin

 
Product features:
Replaceable button and cartridge assembly available
External flow trajectory adjustment
Easy Push
Double stainless steel net filter
WRAS Approved product

Replacement GW6 waterless waste complete with GW6 valve for the following GW6 Urinals:

GW6 Karoo Compact Ceramic Waterless Urinal
GW6 Sahara GRP Waterless Urinal
GW6 Tabernas Waterless Urinal Trough
GW6 Mini Trough Waterless Urinal
GW6 Accona GRP Waterless Urinal Trough

The hole diameter required in the material of the urinal to accommodate this waste is 75mm +/-1.5 mm (2-1/2 Inch BSP)

Recommended connector: McAlpine ST28M 1¼" x 1½" BSP.

The simple solution to address dripping or leaking GW-BFBVA Swan-Neck Cup/Bottle Fillers. These components can degrade over time, often attributed to lime-scale buildup, potential frost damage, or the risk of over-pressurisation leading to failure. Additionally, for hygiene considerations, it is advisable to replace them every 12 months.

Cartridge measures 44mm long with thread diameter 15.5mm.

Optimal pressure is 1.5-2 bar; do not exceed 3 bar.

Celmac Saxon replacement seat & cover For Gentworks stainless steel toilets.

Extremely strong, durable and hard wearing thermoset toilet seat.
Chemical, flame and scratch resistant
Natural anti viral material
Available in white or black

In some instances, these GW-BFBVA bottle fillers spouts may become damaged, either snapping off or coming unscrewed and getting lost. Fortunately, resolving this issue is relatively straightforward. By screwing in a replacement spout, you can restore your tap to working order. However, it's crucial to ensure that no remnants of the broken thread from the damaged spout remain inside the base. If this is the case, a complete tap replacement may be necessary.

This spare part resolves the problem of valve cores being difficult to remove caused by over-tightening with tools during installation or prolonged non-removal of the valve core.

To achieve a secure and effective installation, use high-quality silicone to install the waste outlet. Hand-tighten the back nut and allow it to dry before use, ensuring a strong and reliable seal.

Replacement premium ASCO Solenoid valve for fitting to water supply (15mm compression fit) as supplied with Gentworks Flow Saver and some Dart Valley Systems models. Suitable as an alternative for the Marnic Water Watch Urinal Controllers.

Over a number of years lime scale can cause valves to seize and fail. If your urinal control box is still working then a replacement valve is a cost-effective way to get it functioning again.

6V DC Latching valve with brass body
2mm Orifice with compression fittings for 15mm pipe

TECHNICAL DATA
Voltage: 6V DC
Power: 6W
Max. Working Pressure: 12 bar : Static
Min Working Pressure: 1 bar
Connection 15mm Compression fitting
Orifice Size: 2mm (for standard pressure)
Pressure rating: 10 Bar
Operation type: Latching
Electrical connection: Supplied spade connector kit

The straightforward remedy for fixing dripping or leaking DFBV-WRAS Drinking Fountain Bubblers and GW-BFBVA-WRAS Swan-Neck Cup/Bottle Fillers. These components can deteriorate with time, primarily due to lime-scale accumulation or potential frost damage.

As fitted to the following models:

GW-361-WARS-B

GW-362-WRAS-B

GW-951 and GW-952