Products Map

Key-Valve Waterless Urinal Conversion Kit

Key-Valve Waterless Urinal Conversion Kit

HPKVSE000-KIT
Falcon High Performance Key Valve conversion kit
 This model uses an innovative "bell-valve" promising a much faster flow than previous models, while still preventing odours.
 The Key-Ring dispenses ingredients  that help prevent blockages in the waste pipes. As the contents dissolve with use, the Key-Ring also acts as an indicator of when the cartridge needs changing.
38mm for standard 1 ½” BSP waste outlet.

Typical life is 3 to 4 months but harsher cleaning products may reduce this.

The hole diameter required in the ceramic of the urinal to accommodate this conversion kit is 50mm +/-1.5 mm

Included:
- HPKV SE000 cartridge
- Waste outlet 1.5" BSP x 65mm Long with backnut & rubber washer
- Removal key - multipacks supplied with a single key and no key supplied if selected
- Multifit coupler x BSP nut to 1½" Multifit outlet T29LN

£66.00

 (ex VAT)
Knee Operated Tap and Deck Spout

Knee Operated Tap and Deck Spout

TAP-F-10

Self closing exposed connection knee operated timed flow valve with basin / deck spout. Suitable for commercial and industrial environments and for those with restricted hand movement.

Valve:
The through wall mounted lever articulates in any direction and each activation gives approximately 15 seconds flow. Manufactured from brass with a chrome plated finish and suitable for connecting to a temperature controlled warm water supply.

A multi directional lever operated valve allows the user to deliver hot, cold or mixed temperature water in a controlled and hygienic way. The valves are simple to install, easy to use, vandal resistant and durable making them ideal for wide range of applications

Inlet and outlet are compression fittings to suit 15mm diameter pipe.

Spout:
Deck / basin swivel spout for use with knee operated timed flow valve, manufactured from stainless steel tube and polished to a finish. (½in) BSP male inlet connection.

28mm tap hole.

Pressures and Operating Conditions:
Maximum operating pressure: 5 bar
Minimum operating pressure: 0.5 bar
Maximum inlet Temperature: 65oC
Timed flow at 1 bar: 15 ± 3 seconds

£102.50

 (ex VAT)
KWC DVS - No-touch WC Flushvalve -  Mains Power

KWC DVS - No-touch WC Flushvalve - Mains Power

WC03-002-

The KWC DVS No-Touch WC Flushing System is an electronically operated drop valve which delivers a measured volume of water from the cistern to the WC bowl.  The Flushvalve is activated when the user’s hand comes within 50mm of the sensor and a 35 second delay mechanism prevents abuse between flushes by the user. An electromagnetic solenoid coil is central to the operation of the Flushvalve.

The timer can be adjusted to between 1 and 6 seconds (1 second = 1 litre water approx.) The unit is designed to fit most types of cistern. Most WC cisterns will require the standard 1.5" base but newer water saving 'ECO' cisterns (providing 4L and 2.5L flushes) and some very old cisterns may require the 2" base. Please check before ordering. The 2" base option can be selected from the option lists below.

Pack includes:

- flushvalve
- control box
- wave-on sensor with 38mm bezel
 

 No-Touch WC Flushvalve V2 manual  (1450k)

£266.00

 (ex VAT)
KWC DVS Aquarius A45 Deck Mounted Automatic Tap

KWC DVS Aquarius A45 Deck Mounted Automatic Tap

A45MS

Aquarius A45 Automatic Sensor Tap - Mains Powered

Incorporating a modern and simple design, the A45 tap ensures the ultimate in hygiene for the most discerning of clients. Perfect for all applications where hygiene is paramount. The robust design and build quality also makes it ideal for heavy industrial applications. The A45 is manufactured from stainless steel, and with a solid 38mm stainless steel ingot for the head assembly. Please see "Diagrams" tab for tap measurements.
The integrated sensor comes pre-set, and additional settings can be programmed on site using the hand-held programmer (sold separately), these settings include increased run-on times, and anti-vandal lock out functions.
These A45 taps have the IR sensor located at the end of the tap pointing downward to reduce the risk of false activations caused by reflective materials such as hi-vis jackets.

Water Pressure: The standard solenoid valve supplied has a pressure rating range of 1.0 Bar to 6.0 Bar, and a minimum flow rate 5 L/min per tap.

Electrical Requirements: Each kit requires a 3-amp protected fused spur.

Pack Includes:

- Tap(s) - AT03-011
- Solenoid valve(s)
- Power supply unit (PSU)
- Connector(s) for PSU
- Flex hose(s)

£310.00

 (ex VAT)
KWC DVS Aquarius Wall Mounted Automatic Tap

KWC DVS Aquarius Wall Mounted Automatic Tap

1XAT02-001+AT00-002

Aquarius Wall-Mounted Automatic Sensor Taps - 150mm and 200mm

With its modern and simple design, the Aquarius Wall Mounted tap ensures the ultimate in hygiene for the most discerning of clients. It is manufactured from stainless steel with a solid 38mm stainless steel ingot for the head assembly. Standard finish for this tap is brushed, but polished is available as an extra. This tap is available in two lengths; 150mm and 200mm.

The integrated sensor comes pre-set, and additional settings can be programmed on site using the hand-held programmer (sold separately), these settings include increased run-on times, and anti-vandal lock out functions.
These taps have the IR sensor located at the end of the tap pointing downward to reduce the risk of false activations caused by reflective materials such as hi-vis jackets.

Water Pressure: The standard solenoid valve supplied has a pressure rating range of 1.0 Bar to 6.0 Bar, and a minimum flow rate 5 L/min per tap.

Electrical Requirements: Each kit requires a 3-amp protected fused spur.

Pack Includes:

- Tap(s)
- Solenoid valve(s)
- Battery or power supply unit (PSU)
- Connector(s) for battery or PSU
- Flex hose(s)


Options:

- Length: 150mm or 200mm
- One, two or three stations
- TMV3 thermostatic mixer valve
- Isolation valve and Y-strainer

Click PDF icon to view instruction manual.

DVS Automatic Tap Instruction Manual

£319.00

 (ex VAT)
KWC DVS Flushmatic - Surface Mounted PIR Sensor

KWC DVS Flushmatic - Surface Mounted PIR Sensor

UC01- 001

The Flushmatic from KWC DVS (formerly Dart Valley Systems) is one of the most reliable flush controllers available. The controller box incorporates a sensor to detect urinal usage. It is simple to install and calibrate. Product Codes: UC01-011 / UC01-014 (formerly D114/D124)

Includes:
- Flush controller box to affix to wall
- Solenoid valve for connection to water supply
- 6v lithium battery or power transformer depending on chosen option

Features:
- Up to 80% savings on water costs
- Extremely reliable and low maintenance
- Passive infra-red sensor, occupancy detection
- Low power consumption - typical battery life between 3 and 5 years (battery model)
- Single battery input (battery model)
- Single valve output
- Default preset settings
- Adjustable cistern fill time (15 mins max)
- Adjustable delay time after sensor triggered (30 mins max)
- Janitorial flush (if sensor not triggered for 12 hours) 

DVS D135 Instruction Manual

            Flushmatic Instruction Manual

 

£187.00

 (ex VAT)
KWC DVS Flushmatic - Wall Mounted PIR Sensor - uses AA batteries

KWC DVS Flushmatic - Wall Mounted PIR Sensor - uses AA batteries

UC01-007

The Flushmatic from KWC DVS (formerly Dart Valley Systems) is one of the most reliable flush controllers available. The controller box incorporates a sensor to detect urinal usage.

It is simple to install and calibrate.

Includes:

- Flush controller box to affix to wall

- Solenoid valve for connection to water supply

- Uses 6 x AA batteries (9v).

- LED Battery low indicator

(formerly the D135)

Features:
- Up to 80% savings on water costs
- Extremely reliable and low maintenance
- Passive infra-red sensor, occupancy detection
- Low power consumption - typical battery life of 2 to 4 years
- Single battery input
- Single valve output
- Default preset settings
- Adjustable cistern fill time (15 mins max)
- Adjustable delay time after sensor triggered (30 mins max)
- Janitorial flush (if sensor not triggered for 12 hours)
- Battery low indicator

DVS D135 Instruction Manual

           Flushmatic Instruction Manual

 

 

£204.00

 (ex VAT)
KWC DVS Individual Urinal Sensor - Direct Flush - 1 bowl

KWC DVS Individual Urinal Sensor - Direct Flush - 1 bowl

UC07-010

This individual operation urinal control system is designed to flush a single urinal directly from the mains water supply. No cistern is required. The urinal is flushed when the user walks away. The units are extremely versatile in their operation and we have found them to be very reliable indeed. The design and manufacturing quality are excellent. The installation process is a little more demanding than for some competitive products but that extra time is well spent to ensure the system works as required and continues to do so. Moreover, variable settings allow adjustable time delays between flushing, providing maximum efficiency and savings.

To prevent interference, position LED lights away from these IR devices and ensure they are not in the direct path of IR beams.

Pack includes:

  • 1 x Urinal control system box with built-in power supply
  • 1 x Passive infra-red sensor with 50mm diameter stainless steel bezel suitable for up to 50mm thick wall boards / panels.
  • 1 x Solenoid valve
  • 1 x 3 metre cable
  • Spade connectors 
DVS Urinal Control System Instruction Manual

            DVS Urinal Control System Instruction Manual (492k)

£279.00

 (ex VAT)
KWC DVS Individual Urinal Sensor - Direct Flush - 2 bowls

KWC DVS Individual Urinal Sensor - Direct Flush - 2 bowls

UC07-011

This individual operation urinal control system is designed to flush a single urinal directly from the mains water supply. No cistern is required. The urinal is flushed when the user walks away. The units are extremely versatile in their operation and we have found them to be very reliable indeed. The design and manufacturing quality are excellent. The installation process is a little more demanding than for some competitive products but that extra time is well spent to ensure the system works as required and continues to do so. Moreover, variable settings allow adjustable time delays between flushing, providing maximum efficiency and savings.

To prevent interference, position LED lights away from these IR devices and ensure they are not in the direct path of IR beams.

  • 1 x Urinal control system box with built-in power supply
  • 2 x Passive infra-red sensor with 50mm diameter stainless steel bezel suitable for up to 50mm thick wall boards / panels.
  • 2 x Solenoid valves
  • 2 x 3 metre cables
  • Spade connectors     
DVS Urinal Control System Instruction Manual

            DVS Urinal Control System Instruction Manual (492k)

£345.00

 (ex VAT)
KWC DVS Pearl Cistern Downlighter - PIR Ceiling Recessed

KWC DVS Pearl Cistern Downlighter - PIR Ceiling Recessed

UC01-019

This compact PIR flush controller, manufactured by Dart Valley Systems, incorporates the electronics and settings panel in this ceiling mounted sensor unit. Perfect for washrooms with false ceilings. Very reliable, easy to calibrate with excellent flexibility in flush and cistern fill times.

Includes:
- Solenoid valve for connection to water supply (15mm compression fit)

- Sensor, incorporating flush controller system, for fitting into ceiling above urinals

- 6v lithium battery (Duracell 223 (CR-P2) or similar) or power transformer depending on power option chosen


Features:
- Up to 80% savings on water costs
- Extremely reliable and low maintenance
- Passive infra-red sensor, occupancy detection
- Low power consumption - typical battery life of 2-4 years (battery model)
- Single battery input (battery model)
- Single valve output
- Default pre-set settings
- Valve open button
- Adjustable cistern fill time (15 mins max)
- Adjustable delay time after sensor triggered (30 mins max)
- Janitorial flush (if sensor not triggered for 12 hours)

 
        Pearl Downlighter (cistern fill model) Instruction Manual
 

£183.00

 (ex VAT)
KWC DVS Pearl SOLO Downlighter For Direct Flush - Ceiling Mounted PIR Sensor

KWC DVS Pearl SOLO Downlighter For Direct Flush - Ceiling Mounted PIR Sensor

UC01-027

The DVS Pearl Solo is a suspended ceiling urinal control for a single urinal bowl without a cistern. This mains powered unit is the size of a mini-downlighter, with a narrow beam, and will only be activated if a user stands under the beam for 5 seconds or more.  When the user walks away there is a 3 second delay before the controller flushes for the set number of seconds. 

For concealed installations where the flush pipe and spreader water connection are hidden behind panels or a stud wall, it is recommended to use a Pearl Solo unit for each urinal. To avoid interference, make sure to position LED lights away from these IR devices.

Includes:

- Solenoid valve for connection to water supply
- Sensor, incorporating flush controller system, for fitting into ceiling above urinals
- power transformer

Features:
- Up to 80% savings on water costs
- Extremely reliable and low maintenance
- Passive infra-red sensor, detection indicated by a flashing green light
- Low power consumption
- Single valve output
- Default pre-set settings
- adjustable flush period
- Valve open button
- Janitorial flush (if sensor not triggered for 12 hours) 

Air Break (back-flow preventer): Required to comply with water regulations to prevent contamination of mains water supply.

Isolators and Filters: These are standard plumbing fittings but can be added as an option for convenience. It is recommended that an isolation valve is fitted either side of the solenoid valve. If the water flow through the solenoid valve is too fast, spillage from the air break may result. To remedy this, the isolation valve after the solenoid valve should be adjusted to reduce the flow. Restricting the flow using the isolation valve before the solenoid valve may cause the soelnoid valve to operate incorrectly. It is also recommended that a Y-filter is fitted before the solenoid valve to prevent debris from constricting the flow through the solenoid valve or urinal spreader.

£249.00

 (ex VAT)