Products Map

The Saracen WhiffAway Waterless hygiene seal valves are one of the replacement components for the Saracen Waterless urinal systems. 
The seal acts as a physical barrier stopping drain odours from entering the washroom.
Hygiene seal valves normally require changing annually.

The Powerball cartridge that sits on the top is available separately.

Self closing non-concussive single feed tap is manufactured from brass and has a high polish chrome finish.

Provides approximately 8-10 seconds duration of flow (not adjustable) when the push button top is depressed, savings in both water usage and energy in all commercial and industrial environments.
This tap is supplied with cold and hot indices for either installation.
Inlet Connection - Single Feed (1/2 in) BSP male connection.

WRAS Approved.

Features:
- Self closing operation
- Water & Energy saving
- High polish chrome finish

Pressures & operating conditions:
Minimum operating pressure: 0.5 bar
Maximum operating pressure: 3.0 bar
Maximum Inlet temperature: 43^oC 

Thermostatic Sequential Basin Mixer Tap with Integral Thermostatic mixing valve.

This tap features an integral thermostatic mixing valve (TMV) within the body, eliminating the need for a separate TMV in the supply pipework. It provides precise temperature control, enhances water hygiene, and streamlines installation.

Features:
- Integral Thermostatic mixing valve
- TMV3 Approved
- 35mm tap hole required
- Supplied with copper inlet tails
- High polish chrome finish

Height:131mm
Width: 55mm
Depth: 160mm

Pressures:
Minimum operating pressure: 1.0 bar
Maximum operating pressure: 6.0 bar
Recommended operating range 2.0 to 5 bar

Changeout/Service Key for inserting and extracting Key-Valve waterless urinal cartridges, including the new Falcon High Performace Key Valve (HPKV).

A wall-mounted stainless steel bowl urinal with a compact, anti-vandal design, ideal for concealed pipework or IPS panel installation. Made from 1.2mm thick, bacteriostatic 304 stainless steel, with a satin finish. Up to four urinals can be installed in a range and flushed using a single automatic cistern, with options for a back water inlet with a concealed cistern or a top water inlet with an exposed cistern. For a direct flush setup, select the back inlet, urinal-only option and choose from our direct flush sensors in the related products section below. Also compatible with some in-wall frame systems on the market. Note: Waste pipes must terminate horizontally behind the urinal, NOT suitable for vertical, surface-mounted waste pipes.

Supplied with a 1½” P trap, waste fitting, and flexible stainless steel hose connection, with options for cistern and sparge pipes for installations of up to four urinals.
CE marked. Complies with European standard EN 13407 for 2L flush.

Note: Concealed installations should include a service duct behind the urinal(s) to accommodate pipework. Additionally, incorporating access panels into the installation is advisable for easy maintenance and adjustments.

Bowl Dimensions:  Width= 350mm   Projection from wall = 385mm   Height = 585mm Weight= 7.5kg 

Single concealed urinal cistern & pipework kit for installations where the flushpipes and cistern are to be located behind panels or a stud wall. Kit features high-grade stainless steel pipework with BS EN 1254-2 compression fittings. Compatible with Gentworks range of urinals.

Pack Includes:

- 1x Concealed compact 4.5 litre cistern
- 1x Auto siphon
- 1x Petcock
- 1x Concealed Sparge Pipe Set with pipe clip (for 1 urinal)
- 1x Concealed back spreader

 Single concealed kit Data Sheet

Single exposed urinal cistern & pipework kit for installations where the flushpipes and cistern are to be located on the same side of the wall as the urinal bowls. Kit features high-grade stainless steel pipework with BS EN 1254-2 compression fittings. Compatible with Gentworks range of urinals.

Pack Includes:

- 1x Vitreous china 4.5 litre auto cistern (no brand markings)
- 1x Auto siphon & petcock
- 1x Pair of cistern wall hangers
- 1x Exposed sparge pipe set with pipe clip (for 1 urinal)
- 1x Exposed spreader

 Single exposed kit Data Sheet

Sloping Shroud Secure Washbasin
Length = 450MM   Projection = 350MM   Height = 405MM  Bowl Depth =130MM

This washbasin is designed for use in high risk areas and features all services enclosed within a stainless steel shroud. The SSHB-FRONT version incorporates a wall bracket and removable front access panel for front installation and service access. For added security the access panel is held in place by security screws. The SSHB-DUCT model is designed for rear installation through a service wall or IPS duct panel, secured with the provided threaded rods, offering maximum vandal resistance. Both versions are supplied with a 32mm (1 1/4” BSP) waste outlet WITHOUT overflow and a choice of 28mm or 22mm tap holes for single feed inlet taps.

Filter and isolation kit designed to protect the performance of solenoid valves. Recommend for use with urinal flush controls with solenoid valve.

The Y strainer has a perforated metal mesh filter that will reduce the risk of waterborne dirt and debris from entering the solenoid valve.

Please note: New pipework will still require purging prior to installation of the the filter.

Apollo Solid Surface Care & Maintenance Kit

Solid Surface products are built to endure years of use, even the occasional misuse. This Solid Surface Care & Maintenance kit can swiftly restore their appearance, revitalising their look.

Includes:
1 x Stone Guard anti-bactericidal surface cleaner
1 x 500ml Lightly abrasive Solid Surface Cream Cleaner
1 x 180 Grit Foam Backed Sand Pad
1 x White Polishing Abrasive Disc
1 x Maroon Abrasive Disc
1 x Grey Abrasive Disc
1 x Pair of Blue Nitrile Gloves
1 x Micro Fibre Cloth
1 x Instruction Leaflet

The Twyford Spectrum urinal plastic waste inserts are no longer available separately, they can only be obtained when purchased with the complete Twyford Spectrum urinal installation pack.
As an alternative we can offer a plastic Aquafree Spectrum cartridge, this product contains a biological block but this will dissolve over time and you will then just have the plastic inset that should stop debris entering the waste like the original product. (see Related Products)

The Mcalpine ST28M compression connector is recommended for linking GW6 urinals to 40mm pipework. It is compatible with the following GW6 urinals:

GW6 Karoo Compact Ceramic Waterless Urinal
GW6 Sahara GRP Waterless Urinal
GW6 Tabernas Waterless Urinal Trough
GW6 Mini Trough Waterless Urinal
GW6 Accona GRP Waterless Urinal Trough

Back to wall floor standing stainless steel toilet pan designed for commercial environments. Manufactured from Grade 304 stainless steel with a 1.5mm material thickness. For installation through a service wall or IPS duct panel and fixed via a mounting plate. This floor-standing WC pan features a plain top with pre-drilled holes, complete with blanking caps, allowing for the optional installation of a toilet seat.

- Plain top, no seat.
- 'P' trap for horizontal waste outlet for through wall drainage.
- Stainless steel mounting plate with tamper proof Torx screws.
- CE marked. Complies with European standard EN 997 for 4L flush.

Dimensions:
Width 360mm
Depth 580mm
Height 400mm
Thickness 1.5mm
Weight 14kg

Options:
Concealed hidden Plastic cistern for duct mounting with through wall push button operation.

Back to wall floor standing stainless steel toilet pan designed for commercial environments. Manufactured from Grade 304 stainless steel with a 1.5mm material thickness. For installation through a service wall or IPS duct panel and fixed via a mounting plate. This floor-standing WC pan features a heavy duty seat and cover for improved user comfort.

- Supplied with heavy duty seat & cover
- 'P' trap for horizontal waste outlet for through wall drainage.
- Stainless steel mounting plate with tamper proof Torx screws.
- CE marked. Complies with European standard EN 997 for 4L flush.

Dimensions:
Width 360mm
Depth 580mm
Height 400mm
Thickness 1.5mm
Weight 14kg

Options:
Concealed hidden Plastic cistern for duct mounting with through wall push button operation.

Back to wall floor standing stainless steel toilet pan designed for commercial environments. Manufactured from Grade 304 stainless steel with a 1.5mm material thickness. For installation through a service wall or IPS duct panel and fixed via a mounting plate. This model features seat pads that are securely fixed during manufacture, making them more vandal-resistant and enhancing comfort.

- Supplied with seat pads
- 'P' trap for horizontal waste outlet for through wall drainage.
- Stainless steel mounting plate with tamper proof Torx screws.
- CE marked. Complies with European standard EN 997 for 4L flush.

Dimensions:
Width 360mm
Depth 580mm
Height 400mm
Thickness 1.5mm
Weight 14kg

Options:
Concealed hidden Plastic cistern for duct mounting with through wall push button operation.

Stainless Steel Bucket Sink - With Legs and Hinged Grating

Wall/floor-mounted bucket sink, perfect for commercial use. Securely fitted with supplied brackets and adjustable front feet for levelling.
Made from Grade 304 stainless steel (0.9mm/1.5mm thick), it includes a hinged bucket grating, two legs, and a 1-1/2" waste fitting. A 350mm upstand protects against spillages, ensuring a clean workspace.

Length = 500mm Projection = 517mm Bowl Depth = 200mm Weight = 11kg

Designed for use with wall-mounted bib taps, readily available from most good plumbers' merchants.

Factory Stock: This product is not currently held in Gentworks' warehouse but is available directly from the manufacturer. As a result, the delivery time may be slightly longer than for some of our other products.

This Close Coupled floor mounted WC suite includes a cistern and pneumatic dual push-button flush, making it ideal for situations where a service duct is not available, and a regular back-to-the-wall WC pan cannot be used. The close coupled WC suite is compatible with both P (horizontal) and S (vertical) trap installations. Manufactured from grade 304 stainless steel with a 1.5mm material thickness.

The unit is available with either fixed black seat pads or a heavy duty black plastic seat and cover. Alternatively, the top can be left plain. The WC bowl is designed to be seam-free for improved hygiene.

The water supply can be recessed from below or exposed from either the right or left side. The unit also features two access panels secured with theft prevention TORX security screws.

This unit is CE marked and complies with European standard EN 997 for a 4L flush.

Dimensions:
Width 370mm
Depth 620mm
Pan height 400mm
Overall height including cistern 815mm
Thickness 1.5mm
Weight 21kg

Seat options:
- Plain top with pre-drilled holes, complete with blanking caps, allowing for the optional installation of a toilet seat.
- Back plastic heavy duty seat with cover
- Black comfort seat pads

Factory Stock: This product is not currently held in Gentworks' warehouse but is available directly from the manufacturer. As a result, the delivery time may be slightly longer than for some of our other products.